ASME/ANSI B36.10 - Welded and Seamless Wrought Steel Pipes

Engineering ToolBox - enabled for use with the older versions of the amazing SketchUp Make and the newer "up to date" SketchUp Pro .

Home > Piping > Pipes and Tubes >

ASME/ANSI B36.10 - Welded and Seamless Wrought Steel Pipes - Imperial Units

American National Standard welded and seamless wrought steel pipe - imperial units

welded seamless wrought steel pipe

The chart is based on ASME/ANSI B 36.10 Welded and Seamless Wrought Steel Pipe.

Rotate the screen or widen the window to see full table!

ASME/ANSI B36.10 - Welded and Seamless Wrought Steel Pipes - Imperial Units
	Nominal Diameter	Schedule	Alternative Identification	Outside Diameter	Inside Diameter	Wall Thickness	Weight	Inside Area
	in			in	in	in	lb/ft	in**2
insert!	1/8	30		0.405	0.291	0.057	0.21	0.066
insert!	1/8	40	STD	0.405	0.269	0.068	0.24	0.057
insert!	1/8	80	XS	0.405	0.215	0.095	0.31	0.036
insert!	1/4	30		0.540	0.394	0.073	0.36	0.122
insert!	1/4	40	STD	0.540	0.364	0.088	0.42	0.104
insert!	1/4	80	XS	0.540	0.302	0.119	0.54	0.072
insert!	3/8	30		0.675	0.529	0.073	0.47	0.220
insert!	3/8	40	STD	0.675	0.493	0.091	0.57	0.191
insert!	3/8	80	XS	0.675	0.423	0.126	0.74	0.140
insert!	1/2	30		0.840	0.650	0.095	0.76	0.332
insert!	1/2	40	STD	0.840	0.622	0.109	0.85	0.304
insert!	1/2	80	XS	0.840	0.546	0.147	1.09	0.234
insert!	1/2	160		0.840	0.464	0.188	1.31	0.169
insert!	1/2		XXS	0.840	0.252	0.294	1.71	0.050
insert!	3/4	30		1.050	0.860	0.095	0.97	0.581
insert!	3/4	40	STD	1.050	0.824	0.113	1.13	0.533
insert!	3/4	80	XS	1.050	0.742	0.154	1.47	0.432
insert!	3/4	160		1.050	0.612	0.219	1.94	0.294
insert!	3/4		XXS	1.050	0.434	0.308	2.44	0.148
insert!	1	30		1.315	1.087	0.114	1.46	0.928
insert!	1	40	STD	1.315	1.049	0.133	1.68	0.864
insert!	1	80	XS	1.315	0.957	0.179	2.17	0.719
insert!	1	160		1.315	0.815	0.250	2.84	0.521
insert!	1		XXS	1.315	0.599	0.358	3.66	0.282
insert!	1 1/4	30		1.660	1.426	0.117	1.93	1.60
insert!	1 1/4	40	STD	1.660	1.380	0.140	2.27	1.49
insert!	1 1/4	80	XS	1.660	1.278	0.191	3	1.28
insert!	1 1/4	160		1.660	1.160	0.250	3.76	1.06
insert!	1 1/4		XXS	1.660	0.896	0.382	5.21	0.63
insert!	1 1/2	30		1.900	1.650	0.125	2.37	2.14
insert!	1 1/2	40	STD	1.900	1.610	0.145	2.72	2.03
insert!	1 1/2	80	XS	1.900	1.500	0.200	3.63	1.77
insert!	1 1/2	160		1.900	1.338	0.281	4.86	1.41
insert!	1 1/2		XXS	1.900	1.100	0.400	6.41	0.95
insert!	2			2.375	2.209	0.083	2.03	3.83
insert!	2			2.375	2.157	0.109	2.64	3.65
insert!	2			2.375	2.125	0.125	3	3.54
insert!	2			2.375	2.093	0.141	3.36	3.44
insert!	2	30	STD	2.375	2.067	0.154	3.65	3.35
insert!	2			2.375	2.031	0.172	4.05	3.24
insert!	2			2.375	1.999	0.188	4.39	3.14
insert!	2	80	XS	2.375	1.939	0.218	5.02	2.95
insert!	2			2.375	1.875	0.250	5.67	2.76
insert!	2			2.375	1.813	0.281	6.28	2.58
insert!	2	160		2.375	1.687	0.344	7.46	2.23
insert!	2		XXS	2.375	1.503	0.436	9.03	1.77
insert!	2 1/2			2.875	2.709	0.083	2.47	5.76
insert!	2 1/2			2.875	2.657	0.109	3.22	5.54
insert!	2 1/2			2.875	2.625	0.125	6.67	5.41
insert!	2 1/2			2.875	2.593	0.141	4.12	5.28
insert!	2 1/2			2.875	2.563	0.156	4.53	5.16
insert!	2 1/2			2.875	2.531	0.172	4.97	5.03
insert!	2 1/2			2.875	2.499	0.188	5.4	4.90
insert!	2 1/2	40	STD	2.875	2.469	0.203	5.79	4.79
insert!	2 1/2			2.875	2.443	0.216	6.13	4.69
insert!	2 1/2			2.875	2.375	0.250	7.01	4.43
insert!	2 1/2	80	XS	2.875	2.323	0.276	7.66	4.24
insert!	2 1/2	160		2.875	2.125	0.375	10.01	3.54
insert!	2 1/2		XXS	2.875	1.771	0.552	13.69	2.46
insert!	3			3.500	3.334	0.083	3.03	8.73
insert!	3			3.500	3.282	0.109	3.95	8.46
insert!	3			3.500	3.250	0.125	4.51	8.29
insert!	3			3.500	3.218	0.141	5.06	8.13
insert!	3			3.500	3.188	0.156	5.57	7.98
insert!	3			3.500	3.156	0.172	6.11	7.82
insert!	3			3.500	3.124	0.188	6.65	7.66
insert!	3	40	STD	3.500	3.068	0.216	7.58	7.39
insert!	3			3.500	3.000	0.250	8.68	7.07
insert!	3			3.500	2.938	0.281	9.66	6.78
insert!	3	80	XS	3.500	2.900	0.300	10.25	6.60
insert!	3	160		3.500	2.624	0.438	14.32	5.41
insert!	3		XXS	3.500	2.300	0.600	18.58	4.15
insert!	3 1/2			4.000	3.834	0.083	3.47	11.54
insert!	3 1/2			4.000	3.782	0.109	4.53	11.23
insert!	3 1/2			4.000	3.750	0.125	5.17	11.04
insert!	3 1/2			4.000	3.718	0.141	5.81	10.85
insert!	3 1/2			4.000	3.688	0.156	6.4	10.68
insert!	3 1/2			4.000	3.656	0.172	7.03	10.49
insert!	3 1/2			4.000	3.624	0.188	7.65	10.31
insert!	3 1/2	40	STD	4.000	3.548	0.226	9.11	9.88
insert!	3 1/2			4.000	3.500	0.250	10.01	9.62
insert!	3 1/2			4.000	3.438	0.281	11.16	9.28
insert!	3 1/2	80	XS	4.000	3.364	0.318	12.5	8.88
insert!	4			4.500	4.334	0.083	3.92	14.75
insert!	4			4.500	4.282	0.109	5.11	14.39
insert!	4			4.500	4.250	0.125	5.84	14.18
insert!	4			4.500	4.218	0.141	6.56	13.97
insert!	4			4.500	4.188	0.156	7.24	13.77
insert!	4			4.500	4.156	0.172	7.95	13.56
insert!	4			4.500	4.124	0.188	8.66	13.35
insert!	4			4.500	4.094	0.203	9.32	13.16
insert!	4			4.500	4.062	0.219	10.01	12.95
insert!	4	40	STD	4.500	4.026	0.237	10.79	12.72
insert!	4			4.500	4.000	0.250	11.35	12.56
insert!	4			4.500	3.938	0.281	12.66	12.17
insert!	4			4.500	3.876	0.312	13.96	11.79
insert!	4	80	XS	4.500	3.826	0.337	14.98	11.49
insert!	4	120		4.500	3.624	0.438	19	10.31
insert!	4	160		4.500	3.438	0.531	22.51	9.28
insert!	4		XXS	4.500	3.152	0.674	27.54	7.80
insert!	5			5.563	5.397	0.083	4.86	22.87
insert!	5			5.563	5.313	0.125	7.26	22.16
insert!	5			5.563	5.251	0.156	9.01	21.64
insert!	5			5.563	5.187	0.188	10.79	21.12
insert!	5			5.563	5.125	0.219	12.5	20.62
insert!	5	40	STD	5.563	5.047	0.258	14.62	20.00
insert!	5			5.563	5.001	0.281	15.85	19.63
insert!	5			5.563	4.939	0.312	17.5	19.15
insert!	5			5.563	4.875	0.344	19.17	18.66
insert!	5	80	XS	5.563	4.813	0.375	20.78	18.18
insert!	5	120		5.563	4.563	0.500	27.04	16.34
insert!	5	160		5.563	4.313	0.625	32.96	14.60
insert!	5		XXS	5.563	4.063	0.750	38.55	12.96
insert!	6			6.625	6.459	0.083	5.8	32.75
insert!	6			6.625	6.407	0.109	7.59	32.22
insert!	6			6.625	6.375	0.125	8.68	31.90
insert!	6			6.625	6.343	0.141	9.76	31.58
insert!	6			6.625	6.313	0.156	10.78	31.29
insert!	6			6.625	6.281	0.172	11.85	30.97
insert!	6			6.625	6.249	0.188	12.92	30.65
insert!	6			6.625	6.219	0.203	13.92	30.36
insert!	6			6.625	6.187	0.219	14.98	30.05
insert!	6			6.625	6.125	0.250	17.02	29.45
insert!	6	40	STD	6.625	6.065	0.280	18.97	28.88
insert!	6			6.625	6.001	0.312	21.04	28.27
insert!	6			6.625	5.937	0.344	23.08	27.67
insert!	6			6.625	5.875	0.375	25.03	27.09
insert!	6	80	XS	6.625	5.761	0.432	28.57	26.05
insert!	6			6.625	5.625	0.500	32.71	24.84
insert!	6	120		6.625	5.501	0.562	36.39	23.75
insert!	6			6.625	5.375	0.625	40.05	22.68
insert!	6	160		6.625	5.187	0.719	45.35	21.12
insert!	6			6.625	5.125	0.750	47.06	20.62
insert!	6		XXS	6.625	4.897	0.864	53.16	18.82
insert!	6			6.625	4.875	0.875	53.73	18.66
insert!	8			8.625	8.375	0.125	11.35	55.1
insert!	8			8.625	8.313	0.156	14.11	54.2
insert!	8			8.625	8.249	0.188	16.94	53.4
insert!	8			8.625	8.219	0.203	18.26	53.0
insert!	8			8.625	8.187	0.219	19.66	52.6
insert!	8	20		8.625	8.125	0.250	22.36	51.8
insert!	8	30		8.625	8.071	0.277	24.7	51.1
insert!	8			8.625	8.001	0.312	27.7	50.3
insert!	8	40	STD	8.625	7.981	0.322	28.55	50.0
insert!	8			8.625	7.937	0.344	30.42	49.5
insert!	8			8.625	7.875	0.375	33.04	48.7
insert!	8	60		8.625	7.813	0.406	35.64	47.9
insert!	8			8.625	7.749	0.438	38.3	47.1
insert!	8	80	XS	8.625	7.625	0.500	43.39	45.6
insert!	8			8.625	7.501	0.562	48.4	44.2
insert!	8	100		8.625	7.437	0.594	50.95	43.4
insert!	8			8.625	7.375	0.625	53.4	42.7
insert!	8	120		8.625	7.187	0.719	60.71	40.5
insert!	8			8.625	7.125	0.750	63.08	39.9
insert!	8	140		8.625	7.001	0.812	67.76	38.5
insert!	8		XXS	8.625	6.875	0.875	72.42	37.1
insert!	8	160		8.625	6.813	0.906	74.69	36.4
insert!	8			8.625	6.625	1.000	81.44	34.5
insert!	10			10.750	10.438	0.156	17.65	85.5
insert!	10			10.750	10.374	0.188	21.21	84.5
insert!	10			10.750	10.344	0.203	22.87	84.0
insert!	10			10.750	10.312	0.219	24.63	83.5
insert!	10	20		10.750	10.250	0.250	28.04	82.5
insert!	10			10.750	10.192	0.279	31.2	81.5
insert!	10	30		10.750	10.136	0.307	34.24	80.6
insert!	10			10.750	10.062	0.344	38.23	79.5
insert!	10	40	STD	10.750	10.020	0.365	40.48	78.8
insert!	10			10.750	9.874	0.438	48.24	76.5
insert!	10	60	XS	10.750	9.750	0.500	54.74	74.6
insert!	10			10.750	9.626	0.562	61.15	72.7
insert!	10	80		10.750	9.562	0.594	64.43	71.8
insert!	10			10.750	9.500	0.625	67.58	70.8
insert!	10	100		10.750	9.312	0.719	77.03	68.1
insert!	10			10.750	9.126	0.812	86.18	65.4
insert!	10	120		10.750	9.062	0.844	89.29	64.5
insert!	10			10.750	9.000	0.875	92.28	63.6
insert!	10			10.750	8.874	0.938	98.3	61.8
insert!	10	140	XXS	10.750	8.750	1.000	104.13	60.1
insert!	10	160		10.750	8.500	1.125	115.64	56.7
insert!	10			10.750	8.250	1.250	126.83	53.4
insert!	12			12.750	12.406	0.172	23.11	120.8
insert!	12			12.750	12.374	0.188	25.22	120.2
insert!	12			12.750	12.344	0.203	27.2	119.6
insert!	12			12.750	12.312	0.219	29.31	119.0
insert!	12	20		12.750	12.250	0.250	33.38	117.8
insert!	12			12.750	12.188	0.281	37.42	116.6
insert!	12			12.750	12.126	0.312	41.45	115.4
insert!	12	30		12.750	12.090	0.330	43.77	114.7
insert!	12			12.750	12.062	0.344	45.58	114.2
insert!	12		STD	12.750	12.000	0.375	49.56	113.0
insert!	12	40		12.750	11.938	0.406	53.52	111.9
insert!	12			12.750	11.874	0.438	57.59	110.7
insert!	12		XS	12.750	11.750	0.500	65.42	108.4
insert!	12	60		12.750	11.626	0.562	73.15	106.1
insert!	12			12.750	11.500	0.625	80.93	103.8
insert!	12	80		12.750	11.374	0.688	88.63	101.6
insert!	12			12.750	11.250	0.750	96.12	99.4
insert!	12			12.750	11.126	0.812	103.53	97.2
insert!	12	100		12.750	11.062	0.844	107.32	96.1
insert!	12			12.750	11.000	0.875	110.97	95.0
insert!	12			12.750	10.874	0.938	118.33	92.8
insert!	12	120	XXS	12.750	10.750	1.000	125.49	90.7
insert!	12			12.750	10.626	1.062	132.57	88.6
insert!	12	140		12.750	10.500	1.125	139.67	86.5
insert!	12			12.750	10.250	1.250	153.53	82.5
insert!	12	160		12.750	10.126	1.312	160.27	80.5
insert!	14			14.000	13.624	0.188	27.73	145.7
insert!	14			14.000	13.594	0.203	29.91	145.1
insert!	14			14.000	13.580	0.210	30.93	144.8
insert!	14			14.000	13.562	0.219	32.23	144.4
insert!	14	10		14.000	13.500	0.250	36.71	143.1
insert!	14			14.000	13.438	0.281	41.17	141.8
insert!	14	20		14.000	13.376	0.312	45.61	140.5
insert!	14			14.000	13.312	0.344	50.17	139.1
insert!	14	30	STD	14.000	13.250	0.375	54.57	137.8
insert!	14			14.000	13.188	0.406	58.94	136.5
insert!	14	40		14.000	13.124	0.438	63.44	135.2
insert!	14			14.000	13.062	0.469	67.78	133.9
insert!	14		XS	14.000	13.000	0.500	72.09	132.7
insert!	14			14.000	12.876	0.562	80.66	130.1
insert!	14	60		14.000	12.812	0.594	85.05	128.9
insert!	14			14.000	12.752	0.624	89.28	127.7
insert!	14			14.000	12.624	0.688	97.81	125.1
insert!	14	80		14.000	12.500	0.750	106.13	122.7
insert!	14			14.000	12.376	0.812	114.37	120.2
insert!	14			14.000	12.250	0.875	122.65	117.8
insert!	14	100		14.000	12.124	0.938	130.85	115.4
insert!	14			14.000	12.000	1.000	138.84	113.0
insert!	14			14.000	11.876	1.062	146.74	110.7
insert!	14	120		14.000	11.812	1.094	150.79	109.5
insert!	14			14.000	11.750	1.125	154.69	108.4
insert!	14	140		14.000	11.500	1.250	170.21	103.8
insert!	14	160		14.000	11.188	1.406	189.11	98.3
insert!	14			14.000	10.000	2.000	256.32	78.5
insert!	14			14.000	9.750	2.125	269.5	74.6
insert!	14			14.000	9.600	2.200	277.25	72.3
insert!	14			14.000	9.000	2.500	307.05	63.6
custom!	Nominal Diameter in	Schedule	Alternative Identification	Outside Diameter in	Inside Diameter in	Wall Thickness in	Weight lb/ft	Inside Area in**2

Change before insert!
length unit
color
red offset green offset blue offset unit

?Tip! Adjust pipe length after insert by selecting the pipe and using the Scale or the Push/Pull tool.?

Tools - accessed from within Sketchup

NOTE!! - the insert! and the Tools features only works when the engineeringtoolbox exension is opened from within SketchUp. Install the extension as described in the right column - restart Sketchup and open this tool from the Sketchup Plugins menu.

Edit

undo! redo!

Color

color change color!

Change color of the selected object(s) - may be slow for some more complicated objects (save your model first!)

View

iso! top! front! right! left! back! bottom!

Make Component

make!

Makes a component of the selected object. Note that all objects from the Engineering Toolbox are inserted as individual groups. You should transfer a group to a component sharing the same definition when there is more than one instance of the same object. Tip! Rename the object to its final name before making it a component (in outliner or with right click and entity info).

Rotate Object(s)

degrees around red! , green! or blue! axis.

Select object(s) first. This tool may be very handy for objects with curved surfaces like pipes, elbows and so on.

Move or Copy Object(s)

red offset green offset blue offset unit move/copy!

Move or copy (multiple) selected objects. Make advanced geometric constructions with multiple selections, multiple copies and the offset. Tip! - Use "Make Component" to save space and reduce computer load when working with multiple copies.

Knife

size unit insert the Knife! cut!

Before cut - customize the inserted Knife! The Knife is a group you can rotate, change the size of, and even add or remove objects within (example - add a function curve for an advanced cut). You can also make your own Knife by naming a group "theKnife". After insert and customizing the knife - positioning it to the object(s) where to cut - select the object(s) (must be groups) - and click cut! Afterwards - select the object(s) and remove the parts of the object(s) that you don't want. YouTube demo of the Knife!

Move an Object to an other Objects Position

move!

Select two objects - click "move" - and one of the objects moves to the position and angle of the other object. This tool may be handy when moving objects between axis systems.

Insert (Reference) Line

red green blue startpoint

red green blue endpoint unit insert!

This tool can be used to add reference lines.

Insert Horizontal Plane

red (width) green (depth) blue (vertical position) unit insert!

Insert Vertical Plane

red (horizontal position) green (depth) blue (height) unit insert!

red (width) green (horizontal position) blue (height) unit insert!

Insert Box

red (width) green (depth) blue (height) unit insert!

Privacy Policy

We don't collect information from our users. More about

the Engineering ToolBox Privacy Policy

Engineering ToolBox Sketchup Extension

Insert standard and customized parametric components - like flange beams, lumbers, piping, geometric figures, function curves, stairs and more - to your Google SketchUp models with sketchup.engineeringtoolbox.com

Sketchup Engineering ToolBox

It's FREE and FUN!

Download SketchUp

If you don't have Sketchup installed on your computer - download the older versions of the amazing SketchUp Make or the newer "up to date" SketchUp Pro

Note! - SketchUp Free and Sketchup Shop (the web apps) can't use extensions. You need to install a local version of SketchUp Pro (paid) or Sketchup Make 2017 (free) if you want to use the Engineering ToolBox extension.

Basic Use of the Engineering ToolBox Sketchup Extension

From within Sketchup - open the Engineering ToolBox extension, navigate to component and select insert! - and the component will be added to your model.

Watch basic use of the Engineering ToolBox extension in YouTube

How to add the Engineering ToolBox Extension to your SketchUp

If you experience problems with the functionality - try installation alternative 2 or 3.

Alt. 1 Sketchup Extension Warehouse

open your Sketchup installation
from the Sketchup menu - select Window > Extension Warehouse - and search for "Engineering ToolBox" - and install!
the extension can be enabled/disabled from the Sketchup menu Window > Extension Manager
restart of Sketchup may be required to activate the extension

Alt. 2 Download the Extension - Install with the Sketchup Extension Manager

download engineeringtoolbox_tools_v1.0.5.rbz to a location on your computer
open your Sketchup installation
from the Sketchup menu - select Window and Extension Manager, the button "Install Extension" - and select the downloaded file
restart of Sketchup may be required to activate the extension

Alt. 3 Download the Extension - Manual Install

open the Sketchup Plugin folder on your system
(on Windows it should be something like C:\ProgramData\SketchUp\SketchUp 202X\SketchUp\Plugins\)
(on Mac it should be something like /Users/username/Library/Application Support/SketchUp 20XX/SketchUp/Plugins/)
if present - remove the engineeringtoolbox_tool.rb file and the engineering_tools folder from the Plugin folder
change the extension for the downloaded file (engineeringtoolbox_tools_v1.0.5.rbz) from rbz to zip
decompress the file in your file manager
copy the decompressed engineeringtoolbox_tool.rb file and the engineering_tools folder with its content to the Plugin folder
restart Sketchup

Note that this procedure may be different in older Sketchup versions.

How to use the Engineering ToolBox Sketchup Extension

From the Sketchup menu - select Extensions > Engineering ToolBox. A page like this opens in a separate window - navigate to the wanted component - and select insert! to add the component to your SketchUp model.

Note! The SketchUp Engineering Toolbox is an online resource updated continuously. You need an internet connection to operate.

For some components parameters like length, color, offset and more can be modified before insertion.

Customized components can be inserted by changing parameters in the dialog boxes at the end of the component lists - and clicking "custom!"

Selected objects in the model can be manipulated - rotated, moved, colors changed and more - from the Tools section.

Assistant objects like lines, horizontal and vertical planes can be added.

Some Tips and Tricks

The most efficient way to learn SketchUp is by watching the tutorial videos.

Organize your model in groups - add components to the groups!
Example: Use separate groups for construction steel, piping, the different HVAC systems and more.
Always keep an eye on the model in the "Outliner" window.
Use layers to organize and control the visibility of the model.

The most convenient way to copy an object is by selecting it, using move or (m) and pressing Ctrl (makes a copy) before moving.

Use the rotation tool on this page to precise rotations of components like bends, pipes ...

Precise moving of a object can be done by selecting a point in the object that can be connected to a point in the new position (like a edge on a component, surface, a midpoint or similar).

Bill of Materials

Be aware that objects from The Engineering ToolBox are inserted in Sketchup as Groups. They will show up in the Sketchup > Window > Outliner dialog but not in the Sketchup > Window > Model Info > Statistics (Only Components) dialog.

If you want to make "Bill of Materials" from your model

insert an object from The Engineering ToolBox
select the object in the model (or in the Outliner) after insert
click The Engineering ToolBox "Make Component"

The objects will now show up in the Sketchup > Window > Model Info > Statistics dialog and be available for reporting through Sketchup > File > Generate Report feature or other third party report generators.

An insterted object from The Engineering ToolBox can also be converted to a Component by right clicking the object and selecting Make Component. The name will not be preserved and must be changed after the conversion.

3 18