Engineering ToolBox - enabled for use with the amazing FREE SketchUp 3D drawing and modeling program.

Home  > Structural and Bar Sections  > Circular Hollow Sections  >

Sponsored Links

ASTM A1085 - Round Hollow Structural Sections - HSS - Imperial Units

Circular hollow structural sections - imperial units

circular hollow structural section hss

Rotate the screen or widen the window to see full table!

Designation Outside Diameter Mass Wall Thickness Area of Section Second Moment of Area - Ix
in lb/ft in in**2 in**4
insert! 20x0.5 20 104.23 0.465 28.5 1360
insert! 20x0.375 20 78.67 0.349 21.5 1040
insert! 18x0.5 18 93.54 0.465 25.6 985
insert! 18x0.375 18 70.65 0.349 19.4 754
insert! 16x0.5 16 82.85 0.465 22.7 685
insert! 16x0.438 16 72.86 0.407 19.9 606
insert! 16x0.375 16 62.64 0.349 17.2 526
insert! 16x0.312 16 52.32 0.291 14.4 443
insert! 14x0.5 14 72.16 0.465 19.8 453
insert! 14x0.375 14 54.62 0.349 15 349
insert! 14x0.312 14 45.65 0.291 12.5 295
insert! 12.75x0.5 12.75 65.48 0.465 17.9 339
insert! 12.75x0.375 12.75 49.61 0.349 13.6 262
insert! 12.75x0.25 12.75 33.41 0.233 9.16 180
insert! 12.5x0.625 12.5 79.34 0.581 21.8 387
insert! 12.5x0.5 12.5 64.14 0.465 17.6 319
insert! 12.5x0.375 12.5 48.61 0.349 13.3 246
insert! 12.5x0.312 12.5 40.65 0.291 11.2 208
insert! 12.5x0.25 12.5 32.74 0.233 8.98 169
insert! 12.5x0.188 12.5 24.74 0.174 6.74 128
insert! 12.313x0.625 12.31 78.09 0.581 21.4 369
insert! 12.313x0.5 12.31 63.14 0.465 17.3 304
insert! 12.313x0.375 12.31 47.86 0.349 13.1 235
insert! 12.313x0.312 12.31 40.03 0.291 11 199
insert! 12.313x0.25 12.31 32.24 0.233 8.84 161
insert! 12.313x0.188 12.31 24.37 0.174 6.64 122
insert! 12.25x0.625 12.25 77.67 0.581 21.3 363
insert! 12.25x0.5 12.25 62.8 0.465 17.2 299
insert! 12.25x0.375 12.25 47.6 0.349 13 231
insert! 12.25x0.312 12.25 39.82 0.291 10.9 196
insert! 12.25x0.25 12.25 32.07 0.233 8.8 159
insert! 12.25x0.188 12.25 24.24 0.174 6.6 120
insert! 11.25x0.625 11.25 70.99 0.581 19.5 278
insert! 11.25x0.5 11.25 57.46 0.465 15.8 229
insert! 11.25x0.375 11.25 43.6 0.349 12 178
insert! 11.25x0.312 11.25 36.48 0.291 10 151
insert! 11.25x0.25 11.25 29.4 0.233 8.06 122
insert! 11.25x0.188 11.25 22.23 0.174 6.05 92.9
insert! 10.75x0.5 10.75 54.79 0.465 15 199
insert! 10.75x0.365 10.75 40.52 0.340 11.1 151
insert! 10.75x0.25 10.75 28.06 0.233 7.7 106
insert! 10x0.625 10 62.64 0.581 17.2 191
insert! 10x0.5 10 50.78 0.465 13.9 159
insert! 10x0.375 10 38.58 0.349 10.6 123
insert! 10x0.312 10 32.31 0.291 8.88 105
insert! 10x0.25 10 26.06 0.233 7.15 85.3
insert! 10x0.188 10 19.72 0.174 5.37 64.8
insert! 9.625x0.5 9.63 48.77 0.465 13.4 141
insert! 9.625x0.375 9.63 37.08 0.349 10.2 110
insert! 9.625x0.312 9.63 31.06 0.291 8.53 93
insert! 9.625x0.25 9.63 25.05 0.233 6.87 75.9
insert! 9.625x0.188 9.63 18.97 0.174 5.17 57.7
insert! 8.75x0.5 8.75 44.1 0.465 12.1 104
insert! 8.75x0.375 8.75 33.57 0.349 9.21 81.4
insert! 8.75x0.312 8.75 28.14 0.291 7.73 69.3
insert! 8.75x0.25 8.75 22.72 0.233 6.23 56.6
insert! 8.75x0.188 8.75 17.21 0.174 4.69 43.1
insert! 8.625x0.5 8.63 43.43 0.465 11.9 99.5
insert! 8.625x0.375 8.63 33.07 0.349 9.07 77.8
insert! 8.625x0.322 8.63 28.58 0.300 7.85 68.1
insert! 8.625x0.25 8.63 22.38 0.233 6.14 54.1
insert! 8.625x0.188 8.63 16.96 0.174 4.62 41.3
insert! 7.625x0.375 7.63 29.06 0.349 7.98 52.9
insert! 7.625x0.328 7.63 25.59 0.305 7.01 47.1
insert! 7.625x0.125 7.63 10.02 0.116 2.74 19.3
insert! 7.5x0.5 7.5 37.42 0.465 10.3 63.9
insert! 7.5x0.375 7.5 28.56 0.349 7.84 50.2
insert! 7.5x0.312 7.5 23.97 0.291 6.59 42.9
insert! 7.5x0.25 7.5 19.38 0.233 5.32 35.2
insert! 7.5x0.188 7.5 14.7 0.174 4 26.9
insert! 7x0.5 7 34.74 0.465 9.55 51.2
insert! 7x0.375 7 26.56 0.349 7.29 40.4
insert! 7x0.312 7 22.31 0.291 6.13 34.6
insert! 7x0.25 7 18.04 0.233 4.95 28.4
insert! 7x0.188 7 13.69 0.174 3.73 21.7
insert! 7x0.125 7 9.19 0.116 2.51 14.9
insert! 6.875x0.5 6.88 34.07 0.465 9.36 48.3
insert! 6.875x0.375 6.88 26.06 0.349 7.16 38.2
insert! 6.875x0.312 6.88 21.89 0.291 6.02 32.7
insert! 6.875x0.25 6.88 17.71 0.233 4.86 26.8
insert! 6.875x0.188 6.88 13.44 0.174 3.66 20.6
insert! 6.625x0.5 6.63 32.74 0.465 9 42.9
insert! 6.625x0.432 6.63 28.6 0.403 7.88 38.3
insert! 6.625x0.375 6.63 25.05 0.349 6.88 34
insert! 6.625x0.312 6.63 21.06 0.291 5.79 29.1
insert! 6.625x0.28 6.63 18.99 0.261 5.22 26.5
insert! 6.625x0.25 6.63 17.04 0.233 4.68 23.9
insert! 6.625x0.188 6.63 12.94 0.174 3.53 18.4
insert! 6.625x0.125 6.63 8.69 0.116 2.37 12.6
insert! 6.125x0.5 6.13 30.07 0.465 8.27 33.3
insert! 6.125x0.375 6.13 23.05 0.349 6.33 26.5
insert! 6.125x0.312 6.13 19.39 0.291 5.33 22.7
insert! 6.125x0.25 6.13 15.7 0.233 4.31 18.7
insert! 6.125x0.188 6.13 11.93 0.174 3.25 14.4
insert! 6x0.5 6 29.4 0.465 8.09 31.2
insert! 6x0.375 6 22.55 0.349 6.2 24.8
insert! 6x0.312 6 18.97 0.291 5.22 21.3
insert! 6x0.28 6 17.12 0.261 4.71 19.4
insert! 6x0.25 6 15.37 0.233 4.22 17.6
insert! 6x0.188 6 11.68 0.174 3.18 13.5
insert! 6x0.125 6 7.85 0.116 2.14 9.28
insert! 5.563x0.375 5.56 20.8 0.349 5.72 19.5
insert! 5.563x0.258 5.56 14.63 0.241 4.03 14.3
insert! 5.563x0.188 5.56 10.8 0.174 2.95 10.7
insert! 5.563x0.134 5.56 7.78 0.125 2.14 7.9
insert! 5.5x0.5 5.5 26.73 0.465 7.36 23.5
insert! 5.5x0.375 5.5 20.54 0.349 5.65 18.8
insert! 5.5x0.258 5.5 14.46 0.241 3.98 13.8
insert! 5x0.5 5 24.05 0.465 6.62 17.2
insert! 5x0.375 5 18.54 0.349 5.1 13.9
insert! 5x0.312 5 15.64 0.291 4.3 12
insert! 5x0.258 5 13.08 0.241 3.6 10.2
insert! 5x0.25 5 12.69 0.233 3.49 9.94
insert! 5x0.188 5 9.67 0.174 2.64 7.69
insert! 5x0.125 5 6.51 0.116 1.78 5.31
insert! 4.5x0.337 4.5 15 0.315 4.14 9.12
insert! 4.5x0.237 4.5 10.8 0.221 2.97 6.82
insert! 4.5x0.188 4.5 8.67 0.174 2.36 5.54
insert! 4.5x0.125 4.5 5.85 0.116 1.6 3.84
insert! 4x0.337 4 13.2 0.315 3.65 6.24
insert! 4x0.313 4 12.34 0.291 3.39 5.87
insert! 4x0.25 4 10.02 0.233 2.76 4.91
insert! 4x0.237 4 9.53 0.221 2.62 4.7
insert! 4x0.226 4 9.12 0.211 2.51 4.52
insert! 4x0.22 4 8.89 0.205 2.44 4.41
insert! 4x0.188 4 7.66 0.174 2.09 3.83
insert! 4x0.125 4 5.18 0.116 1.42 2.67
insert! 3.5x0.313 3.5 10.66 0.291 2.93 3.81
insert! 3.5x0.3 3.5 10.26 0.280 2.83 3.7
insert! 3.5x0.25 3.5 8.69 0.233 2.39 3.21
insert! 3.5x0.216 3.5 7.58 0.201 2.08 2.84
insert! 3.5x0.203 3.5 7.15 0.189 1.97 2.7
insert! 3.5x0.188 3.5 6.66 0.174 1.82 2.52
insert! 3.5x0.125 3.5 4.51 0.116 1.23 1.77
insert! 3x0.3 3 8.66 0.280 2.39 2.24
insert! 3x0.25 3 7.35 0.233 2.03 1.95
insert! 3x0.216 3 6.43 0.201 1.77 1.74
insert! 3x0.203 3 6.07 0.189 1.67 1.66
insert! 3x0.188 3 5.65 0.174 1.54 1.55
insert! 3x0.152 3 4.63 0.142 1.27 1.3
insert! 3x0.134 3 4.11 0.125 1.13 1.17
insert! 3x0.12 3 3.69 0.112 1.02 1.06
insert! 2.875x0.25 2.88 7.02 0.233 1.93 1.7
insert! 2.875x0.203 2.88 5.8 0.189 1.59 1.45
insert! 2.875x0.188 2.88 5.4 0.174 1.48 1.35
insert! 2.875x0.125 2.88 3.67 0.116 1.01 0.96
insert! 2.5x0.25 2.5 6.01 0.233 1.66 1.08
insert! 2.5x0.188 2.5 4.65 0.174 1.27 0.87
insert! 2.5x0.125 2.5 3.17 0.116 0.87 0.62
insert! 2.375x0.25 2.38 5.68 0.233 1.57 0.91
insert! 2.375x0.218 2.38 5.03 0.204 1.39 0.83
insert! 2.375x0.188 2.38 4.4 0.174 1.2 0.73
insert! 2.375x0.154 2.38 3.66 0.143 1 0.63
insert! 2.375x0.125 2.38 3.01 0.116 0.82 0.53
insert! 1.9x0.145 1.9 2.72 0.135 0.75 0.29
insert! 1.66x0.14 1.66 2.27 0.130 0.62 0.18
custom!
Length
Color
Offset
Sponsored Links

Tools - accessed from within SketchUp

NOTE!! - the "insert!" and the Tools features only works when the engineeringtoolbox exension is opened from within SketchUp. Install the extension as described in the right column - restart Sketchup and open this tool from the Sketchup Plugins menu.

Edit

undo! - redo!

Color

change color! - of the selected object(s) - may be slow for some more complicated objects (save your model first!)

View

iso! - top! - front! - right! - left! - back! - bottom!

Make Component

make! - makes a component of the selected object. Note that all objects from the Engineering Toolbox are inserted as individual groups. You should transfer a group to a component sharing the same definition when there is more than one instance of the same object. Tips! Rename the object to its final name before making it a component (in outliner or with right click and entity info).

Rotate Object(s)

degrees around red, green or blue axis! (select object(s) first). Very handy for objects with curved surfaces like pipes, elbows ..

Move or Copy Object(s)

move/copy! no. copies red green blue (offset from current position
- move or copy (multiple) selected objects. Make advanced geometric constructions with multiple selections, multiple copies and the offset.
Tip! - Use "Make Component" to save space and reduce computer load when working with multiple copies.

The Knife

- inserts a "Knife" to cut in one or more objects.

insert the Knife! size of the Knife

cut! - before cut: customize the inserted Knife! The Knife is a group you can rotate, change the size of, and even add or remove objects within (example - add a function curve for an advanced cut). You can also make your own Knife by naming a group "theKnife". After insert and customizing the knife - positioning it to the object(s) where to cut - select the object(s) (must be groups) - and click cut! Afterwards - select the object(s) and remove the parts of the object(s) that you don't want.
YouTube demo of the Knife!

Move an Object to another Objects Position

move! - select two objects - then click "move" and one of the objects moves to the position and angle of the other object. Handy when moving between axis systems.

Change Insertion Point

You can change the position and angle of an inserting object by pre-selecting an existing object before Insert! The inserted object will inherit the position of the selected object. Handy when working with non-default axis.

Insert Line

red green blue - Start position
red green blue - End position

insert! - use this feature to add a reference line

Insert Horizontal Plane

insert! red (size) green (size) blue (vertical position)
- use this feature to add a horizontal reference plane

Insert Vertical Plane

insert! red (horizontal position) green (size) blue (vertical size)

insert! red (size) green (horizontal position) blue (vertical size)
- use this feature to add vertical a reference plane

Insert Box

insert! red (width) green (depth) blue (height)
- use this feature to add a box to the model

Insert external Component

insert! name url
- use this feature to add an external .skp component from the internet by adding the component url

Privacy

We don't collect information from our users. Only emails and answers are saved in our archive. Cookies are only used in the browser to improve user experience.

Some of our calculators and applications let you save application data to your local computer. These applications will - due to browser restrictions - send data between your browser and our server. We don't save this data.

Google use cookies for serving our ads and handling visitor statistics. Please read Google Privacy & Terms for more information about how you can control adserving and the information collected.

AddThis use cookies for handling links to social media. Please read AddThis Privacy for more information.