EN 10210/10219 - RHS Rectangular Hollow Hot/Cold Formed Sections

Engineering ToolBox - enabled for use with the older versions of the amazing SketchUp Make and the newer "up to date" SketchUp Pro .

Home > Structural and Bar Sections > Hollow Structural Sections >

EN 10210/10219 - RHS Rectangular Hollow Hot/Cold Formed Sections - Metric Units

Rectangular Hollow Sections - Hot/Cold Formed .. EN 10210/10219 - Metric Units

rectangular hollow section

Rotate the screen or widen the window to see full table!

EN 10210/10219 - RHS Rectangular Hollow Hot/Cold Formed Sections - Metric Units
	Designation	Width	Depth	Thickness	Ext. Corner Radii	Int. Corner Radii	Mass	Area of Section	Second Moment of Area - Ix	Second Moment of Area - Iy
		mm	mm	mm	mm	mm	kg/m	cm**2	cm**4	cm**4
insert!	40 x 20 x 2.0	20	40	2	4	2	1.7	2.14	4.05	1.34
insert!	40 x 20 x 2.5	20	40	2.5	5	2.5	2.0	2.59	4.69	1.54
insert!	40 x 20 x 3.0	20	40	3	6	3	2.4	3.01	5.21	1.68
insert!	50 x 25 x 2.0	25	50	2	4	2	2.2	2.74	8.38	2.81
insert!	50 x 25 x 2.5	25	50	2.5	5	2.5	2.6	3.34	9.89	3.28
insert!	50 x 25 x 3.0	25	50	3	6	3	3.1	3.91	11.2	3.67
insert!	50 x 30 x 2.0	30	50	2	4	2	2.3	2.94	9.54	4.29
insert!	50 x 30 x 2.5	30	50	2.5	5	2.5	2.8	3.59	11.3	5.05
insert!	50 x 30 x 3.0	30	50	3	6	3	3.3	4.21	12.8	5.70
insert!	50 x 30 x 4.0	30	50	4	8	4	4.2	5.35	15.3	6.69
insert!	60 x 40 x 2.0	40	60	2	4	2	2.9	3.74	18.4	9.83
insert!	60 x 40 x 2.5	40	60	2.5	5	2.5	3.6	4.59	22.1	11.7
insert!	60 x 40 x 3.0	40	60	3	6	3	4.3	5.41	25.4	13.4
insert!	60 x 40 x 4.0	40	60	4	8	4	5.5	6.95	31.0	16.3
insert!	60 x 40 x 5.0	40	60	5	10	5	6.6	8.36	35.3	18.4
insert!	70 x 50 x 2.0	50	70	2	4	2	3.6	4.54	31.5	18.8
insert!	70 x 50 x 2.5	50	70	2.5	5	2.5	4.4	5.59	38.0	22.6
insert!	70 x 50 x 3.0	50	70	3	6	3	5.2	6.61	44.1	26.1
insert!	70 x 50 x 4.0	50	70	4	8	4	6.7	8.55	54.7	32.2
insert!	70 x 50 x 5.0	50	70	5	10	5	8.1	10.4	63.5	37.2
insert!	80 x 40 x 2.0	40	80	2	4	2	3.6	4.54	37.4	12.7
insert!	80 x 40 x 2.5	40	80	2.5	5	2.5	4.4	5.59	45.1	15.3
insert!	80 x 40 x 3.0	40	80	3	6	3	5.2	6.61	52.3	17.6
insert!	80 x 40 x 4.0	40	80	4	8	4	6.7	8.55	64.8	21.5
insert!	80 x 40 x 5.0	40	80	5	10	5	8.1	10.4	75.1	24.6
insert!	80 x 60 x 2.0	60	80	2	4	2	4.2	5.34	49.5	31.9
insert!	80 x 60 x 2.5	60	80	2.5	5	2.5	5.2	6.59	60.1	38.6
insert!	80 x 60 x 3.0	60	80	3	6	3	6.1	7.81	70.0	44.9
insert!	80 x 60 x 4.0	60	80	4	8	4	8.0	10.1	87.9	56.1
insert!	80 x 60 x 5.0	60	80	5	10	5	9.7	12.4	103	65.7
insert!	90 x 50 x 2.0	50	90	2	4	2	4.2	5.34	57.9	23.4
insert!	90 x 50 x 2.5	50	90	2.5	5	2.5	5.2	6.59	70.3	28.2
insert!	90 x 50 x 3.0	50	90	3	6	3	6.1	7.81	81.9	32.7
insert!	90 x 50 x 3.6	50	90	3.6	7.2	3.6	7.2	9.23	94.7	37.7
insert!	90 x 50 x 4.0	50	90	4	8	4	8.0	10.1	103	40.7
insert!	90 x 50 x 5.0	50	90	5	10	5	9.7	12.4	121	47.4
insert!	100 x 40 x 2.5	40	100	2.5	5	2.5	5.2	6.59	79.3	18.8
insert!	100 x 40 x 3.0	40	100	3	6	3	6.1	7.81	92.3	21.7
insert!	100 x 40 x 4.0	40	100	4	8	4	8.0	10.1	116	26.7
insert!	100 x 40 x 5.0	40	100	5.0	10	5	9.7	12.4	136	30.8
insert!	100 x 50 x 2.5	50	100	2.5	5	2.5	5.6	7.09	91.2	31.1
insert!	100 x 50 x 3.0	50	100	3	6	3	6.6	8.41	106	36.1
insert!	100 x 50 x 4.0	50	100	4	8	4	8.6	10.9	134	44.9
insert!	100 x 50 x 5.0	50	100	5	10	5	10.5	13.4	158	52.5
insert!	100 x 50 x 6.0	50	100	6	12	6	12.3	15.6	179	58.7
insert!	100 x 50 x 6.3	50	100	6.3	15.75	9.45	12.5	15.9	176	58.2
insert!	100 x 60 x 3.0	60	100	3	6	3	7.1	9.01	121	54.6
insert!	100 x 60 x 3.6	60	100	3.6	7.2	3.6	8.4	10.7	140	63.3
insert!	100 x 60 x 4.0	60	100	4	8	4	9.2	11.7	153	68.7
insert!	100 x 60 x 5.0	60	100	5	10	5	11.3	14.4	181	80.8
insert!	100 x 60 x 6.0	60	100	6	12	6	13.2	16.8	205	91.2
insert!	100 x 60 x 6.3	60	100	6.3	15.75	9.45	13.5	17.2	203	90.9
insert!	100 80 x x 2.5	80	100	2.5	5	2.5	6.7	8.59	127	90.2
insert!	100 x 80 x 3.0	80	100	3	6	3	8.0	10.2	149	106
insert!	100 x 80 x 4.0	80	100	4	8	4	10.5	13.3	189	134
insert!	100 x 80 x 5.0	80	100	5	10	5	12.8	16.4	226	160
insert!	100 x 80 x 6.0	80	100	6	12	6	15.1	19.2	258	182
insert!	100 x 80 x 6.3	80	100	6.3	15.75	9.45	15.5	19.7	259	183
insert!	120 x 60 x 2.5	60	120	2.5	5	2.5	6.8	8.59	161	55.2
insert!	120 x 60 x 3.0	60	120	3	6	3	8.0	10.2	189	64.4
insert!	120 x 60 x 3.6	60	120	3.6	7.2	3.6	9.5	12.1	221	74.8
insert!	120 x 60 x 4.0	60	120	4	8	4	10.5	13.3	241	81.2
insert!	120 x 60 x 5.0	60	120	5	10	5	12.8	16.4	287	96.0
insert!	120 x 60 x 6.0	60	120	6	12	6	15.1	19.2	328	109
insert!	120 x 60 x 6.3	60	120	6.3	15.75	9.45	15.5	19.7	327	109
insert!	120 x 60 x 8.0	60	120	8	20	12	18.9	24.0	375	124
insert!	120 x 80 x 3.0	80	120	3	6	3	9.0	11.4	230	123
insert!	120 x 80 x 4.0	80	120	4	8	4	11.7	14.9	295	157
insert!	120 x 80 x 5.0	80	120	5	10	5	14.4	18.4	353	188
insert!	120 x 80 x 6.0	80	120	6	12	6	17.0	21.6	406	215
insert!	120 x 80 x 6.3	80	120	6.3	15.75	9.45	17.5	22.2	408	217
insert!	120 x 80 x 8.0	80	120	8	20	12	21.4	27.2	476	252
insert!	140 x 80 x 4.0	80	140	4	8	4	13.0	16.5	430	180
insert!	140 x 80 x 5.0	80	140	5	10	5	16.0	20.4	517	216
insert!	140 x 80 x 6.0	80	140	6	12	6	18.9	24.0	597	248
insert!	140 x 80 x 6.3	80	140	6.3	15.75	9.45	19.4	24.8	603	251
insert!	140 x 80 x 8.0	80	140	8	20	12	23.9	30.4	708	293
insert!	150 x 100 x 4.0	100	150	4	8	4	14.9	18.9	595	319
insert!	150 x 100 x 5.0	100	150	5	10	5	18.3	23.4	719	384
insert!	150 x 100 x 6.0	100	150	6	12	6	21.7	27.6	835	444
insert!	150 x 100 x 6.3	100	150	6.3	15.75	9.45	22.4	28.5	848	453
insert!	150 x 100 x 8.0	100	150	8	20	12	27.7	35.2	1008	536
insert!	150 x 100 x 10.0	100	150	10	25	15	33.4	42.6	1162	614
insert!	150 x 100 x 12.0	100	150	12	36	24	37.7	48.1	1207	642
insert!	150 x 100 x 12.5	100	150	12.5	37.5	25	38.9	49.5	1225	651
insert!	160 x 80 x 4.0	80	160	4	8	4	14.2	18.1	598	204
insert!	160 x 80 x 5.0	80	160	5	10	5	17.5	22.4	722	244
insert!	160 x 80 x 6.0	80	160	6	12	6	20.7	26.4	836	281
insert!	160 x 80 x 6.3	80	160	6.3	15.75	9.45	21.4	27.3	846	286
insert!	160 x 80 x 8.0	80	160	8	20	12	26.4	33.6	1001	335
insert!	160 x 80 x 10.0	80	160	10	25	15	31.8	40.6	1146	380
insert!	160 x 80 x 12.0	80	160	12	36	24	35.8	45.7	1171	391
insert!	160 x 80 x 12.5	80	160	12.5	37.5	25	36.9	47.0	1185	396
insert!	180 x 100 x 4.0	100	180	4	8	4	16.8	21.3	926	374
insert!	180 x 100 x 5.0	100	180	5	10	5	20.7	26.4	1124	452
insert!	180 x 100 x 6.0	100	180	6	12	6	24.5	31.2	1310	524
insert!	180 x 100 x 6.3	100	180	6.3	15.75	9.45	25.4	32.3	1335	536
insert!	180 x 100 x 8.0	100	180	8	20	12	31.4	40.0	1598	637
insert!	180 x 100 x 10.0	100	180	10	25	15	38.1	48.6	1859	736
insert!	180 x 100 x 12.0	100	180	12	36	24	43.4	55.3	1965	782
insert!	180 x 100 x 12.5	100	180	12.5	37.5	25	44.8	57	2001	796
insert!	200 x 100 x 4.0	100	200	4	8	4	18.0	22.9	1200	411
insert!	200 x 100 x 5.0	100	200	5	10	5	22.3	28.4	1459	497
insert!	200 x 100 x 6.0	100	200	6	12	6	26.4	33.6	1703	577
insert!	200 x 100 x 6.3	100	200	6.3	15.75	9.45	27.4	34.8	1739	591
insert!	200 x 100 x 8.0	100	200	8	20	12	33.9	43.2	2091	705
insert!	200 x 100 x 10.0	100	200	10	25	15	41.3	52.6	2444	818
insert!	200 x 100 x 12.0	100	200	12	36	24	47.1	60.1	2607	876
insert!	200 x 100 x 12.5	100	200	12.5	37.5	25	48.7	62.0	2659	892
insert!	200 x 120 x 4.0	120	200	4	8	4	19.3	24.5	1353	618
insert!	200 x 120 x 5.0	120	200	5	10	5	23.8	30.4	1649	750
insert!	200 x 120 x 6.0	120	200	6	12	6	28.3	36.0	1929	874
insert!	200 x 120 x 6.3	120	200	6.3	15.75	9.45	29.3	37.4	1976	898
insert!	200 x 120 x 8.0	120	200	8	20	12	36.5	46.4	2386	1079
insert!	200 x 120 x 10.0	120	200	10	25	15	44.4	56.6	2806	1262
insert!	200 x 120 x 12.0	120	200	12	36	24	50.9	64.9	3031	1368
insert!	200 x 120 x 12.5	120	200	12.5	37.5	25	52.6	67.0	3099	1397
insert!	250 x 100 x 5.0	100	250	5	10	5	26.2	33.4	2554	610
insert!	250 x 100 x 6.0	100	250	6	12	6	31.1	39.6	2992	710
insert!	250 x 100 x 6.3	100	250	6.3	15.75	9.45	32.3	41.1	3066	730
insert!	250 x 100 x 8.0	100	250	8	20	12	40.2	51.2	3714	875
insert!	250 x 100 x 10.0	100	250	10	25	15	49.1	62.6	4384	1021
insert!	250 x 100 x 12.5	100	250	12.5	37.5	25	58.5	74.5	4868	1133
insert!	250 x 150 x 5.0	150	250	5	10	5	30.1	38.4	3304	1508
insert!	250 x 150 x 6.0	150	250	6	12	6	35.8	45.6	3886	1768
insert!	250 x 150 x 6.3	150	250	6.3	15.75	9.45	37.2	47.4	4001	1825
insert!	250 x 150 x 8.0	150	250	8	20	12	46.5	59.2	4886	2219
insert!	250 x 150 x 10.0	150	250	10	25	15	57.0	72.6	5825	2634
insert!	250 x 150 x 12.0	150	250	12	36	24	66.0	84.1	6458	2925
insert!	250 x 150 x 12.5	150	250	12.5	37.5	25	68.3	87.0	6633	3002
insert!	250 x 150 x 16.0	150	250	16	48	32	83.8	107	7660	3453
insert!	260 x 180 x 5.0	180	260	5	10	5	33.2	42.4	4121	2350
insert!	260 x 180 x 6.3	180	260	6.3	15.75	9.45	41.2	52.5	5013	2856
insert!	260 x 180 x 8.0	180	260	8	20	12	51.5	65.6	6145	3493
insert!	260 x 180 x 10.0	180	260	10	25	15	63.2	80.6	7363	4174
insert!	260 x 180 x 12.0	180	260	12	36	24	73.5	93.7	8245	4679
insert!	260 x 180 x 12.5	180	260	12.5	37.5	25	76.2	97.0	8482	4812
insert!	260 x 180 x 16.0	180	260	16	48	32	93.9	120	9923	5614
insert!	300 x 100 x 6.0	100	300	6	12	6	35.8	45.6	4777	842
insert!	300 x 100 x 6.3	100	300	6.3	15.75	9.45	37.2	47.4	4907	868
insert!	300 x 100 x 8.0	100	300	8	20	12	46.5	59.2	5978	1045
insert!	300 x 100 x 10.0	100	300	10	25	15	57.0	72.6	7106	1224
insert!	300 x 100 x 12.0	100	300	12	36	24	66.0	84.1	7808	1343
insert!	300 x 100 x 12.5	100	300	12.5	37.5	25	68.3	87.0	8010	1374
insert!	300 x 100 x 16.0	100	300	16	48	32	83.8	107	9157	1543
insert!	300 x 150 x 6.0	150	300	6	12	6	40.5	51.6	6074	2080
insert!	300 x 150 x 6.3	150	300	6.3	15.75	9.45	42.2	53.7	6266	2150
insert!	300 x 150 x 8.0	150	300	8	20	12	52.8	67.2	7684	2623
insert!	300 x 150 x 10.0	150	300	10	25	15	64.8	82.6	9209	3125
insert!	300 x 150 x 12.0	150	300	12	36	24	75.4	96.1	10298	3498
insert!	300 x 150 x 12.5	150	300	12.5	37.5	25	78.1	99.5	10594	3595
insert!	300 x 150 x 16.0	150	300	16	48	32	96.4	123	12387	4174
insert!	300 x 200 x 6.0	200	300	6	12	6	45.2	57.6	7370	3962
insert!	300 x 200 x 6.3	200	300	6.3	15.75	9.45	47.1	60.0	7624	4104
insert!	300 x 200 x 8.0	200	300	8	20	12	59.1	75.2	9389	5042
insert!	300 x 200 x 10.0	200	300	10	25	15	72.7	92.6	11313	6058
insert!	300 x 200 x 12.0	200	300	12	36	24	84.8	108	12788	6854
insert!	300 x 200 x 12.5	200	300	12.5	37.5	25	88.0	112	13179	7060
insert!	300 x 200 x 16.0	200	300	16	48	32	109	139	15617	8340
insert!	350 x 250 x 6.0	250	350	6	12	6	54.7	69.6	12457	7458
insert!	350 x 250 x 6.3	250	350	6.3	15.75	9.45	57	72.6	12923	7744
insert!	350 x 250 x 8.0	250	350	8	20	12	71.6	91.2	16001	9573
insert!	350 x 250 x 10.0	250	350	10	25	15	88.4	113	19407	11588
insert!	350 x 250 x 12.0	250	350	12	36	24	104	132	22197	13261
insert!	350 x 250 x 12.5	250	350	12.5	37.5	25	108	137	22922	13690
insert!	350 x 250 x 16.0	250	350	16	48	32	134	171	27580	16434
insert!	400 x 200 x 8.0	200	400	8	20	12	71.6	91.2	18974	6517
insert!	400 x 200 x 10.0	200	400	10	25	15	88.4	113	23003	7864
insert!	400 x 200 x 12.5	200	400	12.5	37.5	25	108	137	27100	9260
insert!	400 x 200 x 16.0	200	400	16	48	32	134	171	32547	11056
insert!	400 x 300 x 8.0	300	400	8	20	12	84.2	107	25122	16212
insert!	400 x 300 x 10.0	300	400	10	25	15	104	133	30609	19726
insert!	400 x 300 x 12.0	300	400	12	36	24	123	156	35284	22747
insert!	400 x 300 x 12.5	300	400	12.5	37.5	25	127	162	36489	23517
insert!	400 x 300 x16.0	300	400	16	48	32	159	203	44350	28535
custom!	Designation	Width mm	Depth mm	Thickness mm	Ext. Corner Radii mm	Int. Corner Radii mm	Mass kg/m	Area of Section cm**2	Second Moment of Area - Ix cm**4	Second Moment of Area - Iy cm**4

Change before insert!
length unit
color
red offset green offset blue offset unit

Note that rounded corners are not drawn. It makes moving and positioning of the components easier.

The manufacturing processes of hot finished and cold formed hollow sections are very different. Hot finished hollow sections are formed at normalising temperature (approx 900^oC) and are produced in accordance with standard EN 10210-1:2006, while cold-formed hollow sections are formed at ambient temperatures and are produced in accordance with standard EN 10219-1:2006.

Tools - accessed from within Sketchup

NOTE!! - the insert! and the Tools features only works when the engineeringtoolbox exension is opened from within SketchUp. Install the extension as described in the right column - restart Sketchup and open this tool from the Sketchup Plugins menu.

Edit

undo! redo!

Color

color change color!

Change color of the selected object(s) - may be slow for some more complicated objects (save your model first!)

View

iso! top! front! right! left! back! bottom!

Make Component

make!

Makes a component of the selected object. Note that all objects from the Engineering Toolbox are inserted as individual groups. You should transfer a group to a component sharing the same definition when there is more than one instance of the same object. Tip! Rename the object to its final name before making it a component (in outliner or with right click and entity info).

Rotate Object(s)

degrees around red! , green! or blue! axis.

Select object(s) first. This tool may be very handy for objects with curved surfaces like pipes, elbows and so on.

Move or Copy Object(s)

red offset green offset blue offset unit move/copy!

Move or copy (multiple) selected objects. Make advanced geometric constructions with multiple selections, multiple copies and the offset. Tip! - Use "Make Component" to save space and reduce computer load when working with multiple copies.

Knife

size unit insert the Knife! cut!

Before cut - customize the inserted Knife! The Knife is a group you can rotate, change the size of, and even add or remove objects within (example - add a function curve for an advanced cut). You can also make your own Knife by naming a group "theKnife". After insert and customizing the knife - positioning it to the object(s) where to cut - select the object(s) (must be groups) - and click cut! Afterwards - select the object(s) and remove the parts of the object(s) that you don't want. YouTube demo of the Knife!

Move an Object to an other Objects Position

move!

Select two objects - click "move" - and one of the objects moves to the position and angle of the other object. This tool may be handy when moving objects between axis systems.

Insert (Reference) Line

red green blue startpoint

red green blue endpoint unit insert!

This tool can be used to add reference lines.

Insert Horizontal Plane

red (width) green (depth) blue (vertical position) unit insert!

Insert Vertical Plane

red (horizontal position) green (depth) blue (height) unit insert!

red (width) green (horizontal position) blue (height) unit insert!

Insert Box

red (width) green (depth) blue (height) unit insert!

Privacy Policy

We don't collect information from our users. More about

the Engineering ToolBox Privacy Policy

Engineering ToolBox Sketchup Extension

Insert standard and customized parametric components - like flange beams, lumbers, piping, geometric figures, function curves, stairs and more - to your Google SketchUp models with sketchup.engineeringtoolbox.com

Sketchup Engineering ToolBox

It's FREE and FUN!

Download SketchUp

If you don't have Sketchup installed on your computer - download the older versions of the amazing SketchUp Make or the newer "up to date" SketchUp Pro

Note! - SketchUp Free and Sketchup Shop (the web apps) can't use extensions. You need to install a local version of SketchUp Pro (paid) or Sketchup Make 2017 (free) if you want to use the Engineering ToolBox extension.

Basic Use of the Engineering ToolBox Sketchup Extension

From within Sketchup - open the Engineering ToolBox extension, navigate to component and select insert! - and the component will be added to your model.

Watch basic use of the Engineering ToolBox extension in YouTube

How to add the Engineering ToolBox Extension to your SketchUp

If you experience problems with the functionality - try installation alternative 2 or 3.

Alt. 1 Sketchup Extension Warehouse

open your Sketchup installation
from the Sketchup menu - select Window > Extension Warehouse - and search for "Engineering ToolBox" - and install!
the extension can be enabled/disabled from the Sketchup menu Window > Extension Manager
restart of Sketchup may be required to activate the extension

Alt. 2 Download the Extension - Install with the Sketchup Extension Manager

download engineeringtoolbox_tools_v1.0.5.rbz to a location on your computer
open your Sketchup installation
from the Sketchup menu - select Window and Extension Manager, the button "Install Extension" - and select the downloaded file
restart of Sketchup may be required to activate the extension

Alt. 3 Download the Extension - Manual Install

open the Sketchup Plugin folder on your system
(on Windows it should be something like C:\ProgramData\SketchUp\SketchUp 202X\SketchUp\Plugins\)
(on Mac it should be something like /Users/username/Library/Application Support/SketchUp 20XX/SketchUp/Plugins/)
if present - remove the engineeringtoolbox_tool.rb file and the engineering_tools folder from the Plugin folder
change the extension for the downloaded file (engineeringtoolbox_tools_v1.0.5.rbz) from rbz to zip
decompress the file in your file manager
copy the decompressed engineeringtoolbox_tool.rb file and the engineering_tools folder with its content to the Plugin folder
restart Sketchup

Note that this procedure may be different in older Sketchup versions.

How to use the Engineering ToolBox Sketchup Extension

From the Sketchup menu - select Extensions > Engineering ToolBox. A page like this opens in a separate window - navigate to the wanted component - and select insert! to add the component to your SketchUp model.

Note! The SketchUp Engineering Toolbox is an online resource updated continuously. You need an internet connection to operate.

For some components parameters like length, color, offset and more can be modified before insertion.

Customized components can be inserted by changing parameters in the dialog boxes at the end of the component lists - and clicking "custom!"

Selected objects in the model can be manipulated - rotated, moved, colors changed and more - from the Tools section.

Assistant objects like lines, horizontal and vertical planes can be added.

Some Tips and Tricks

The most efficient way to learn SketchUp is by watching the tutorial videos.

Organize your model in groups - add components to the groups!
Example: Use separate groups for construction steel, piping, the different HVAC systems and more.
Always keep an eye on the model in the "Outliner" window.
Use layers to organize and control the visibility of the model.

The most convenient way to copy an object is by selecting it, using move or (m) and pressing Ctrl (makes a copy) before moving.

Use the rotation tool on this page to precise rotations of components like bends, pipes ...

Precise moving of a object can be done by selecting a point in the object that can be connected to a point in the new position (like a edge on a component, surface, a midpoint or similar).

Bill of Materials

Be aware that objects from The Engineering ToolBox are inserted in Sketchup as Groups. They will show up in the Sketchup > Window > Outliner dialog but not in the Sketchup > Window > Model Info > Statistics (Only Components) dialog.

If you want to make "Bill of Materials" from your model

insert an object from The Engineering ToolBox
select the object in the model (or in the Outliner) after insert
click The Engineering ToolBox "Make Component"

The objects will now show up in the Sketchup > Window > Model Info > Statistics dialog and be available for reporting through Sketchup > File > Generate Report feature or other third party report generators.

An insterted object from The Engineering ToolBox can also be converted to a Component by right clicking the object and selecting Make Component. The name will not be preserved and must be changed after the conversion.

3 18